Brushed Gold Aluminium Flat Bar Strip 2mm, Light Gold Satin Flat Trim 15 & 20mm, 0.5m, 1m & 2.5m

📏 Size:

Flat bar, 2 mm (0.08in) thick. Widths: 15mm (0.59in) and 20mm (0.79in).

📏 Lengths Available:

✨ Colour:

Brushed Light Gold, anodised satin finish.

Brushed gold aluminium flat bar adds a warm, refined line to furniture, walls and tiled surfaces. This anodised strip has a light gold colour, close to light brass or champagne, with a fine brushed texture running along its length. It is just 2mm thick, so it sits almost flush and gives a slim, elegant finish.

The satin finish has a soft sheen that changes gently with the light, so the strip looks warm and natural rather than shiny. It pairs well with brushed brass taps and handles, marble, light wood and warm neutral walls, which makes this gold flat trim a good fit for modern luxury, Art Deco, Japandi and Scandi interiors.

Choose from two widths, 15mm and 20mm, and three lengths. The 0.5m strips are handy for small details, shelf fronts and inlay work. The 1m length is the all-rounder, and the 2.5m length lets you run a long edge or wall line in one piece without joins. For corners, see the matching brushed gold aluminium angle trim. The same flat bar also comes in black and silver. Prefer plastic? See our PVC flat bar.

Key Features:

• Anodised aluminium flat bar in brushed light gold
• Satin finish with a soft sheen and a visible brushed texture
• Light brass, champagne-gold tone rather than deep yellow gold
• Widths: 15mm and 20mm, 2mm (0.08in) thick
• Lengths: 0.5m, 1m and 2.5m, easy to cut to size
• Ready to fit, no painting needed
• Manufactured in the EU, dispatched from our UK warehouse

Applications:

• Gold flat trim for shelves, cabinets and furniture edges
• Decorative inlay strip on walls, tiles and furniture fronts
• Cover strip for joints between panels and boards
• Accent lines on feature walls, headboards and frames
• Modern luxury, Art Deco, Japandi and Scandi interiors

Easy Installation:

• Measure the area and mark the required length on the strip.
• Cut to size with a fine-tooth hacksaw and lightly file the cut end. Mitre at 45° where two strips meet at a corner.
• Make sure the surface is clean, dry and flat.
• Fix in place with a suitable adhesive, or drill and secure with screws or rivets.
• Handle the visible face with care during fitting to keep the brushed finish clean.

Good to Know:

• Sizes are given as width x thickness.
• Each variant is one length in the size you select.
• 2.5m lengths are sent by Parcelforce 48 hour service because of their length.
• Colours may look slightly different depending on your screen and lighting.

Fit a brushed gold aluminium flat bar that gives edges and walls a soft, light gold finish, available in 15mm and 20mm widths and 0.5m, 1m or 2.5m lengths, with same day dispatch on orders before 12:00 PM.