Wooden corner profiles are solid timber angle mouldings that cover a 90 degree corner. Depending on the job people call them wooden corner trim, pine corner trim, angle beading, corner moulding or wooden corner protectors, they all describe the same L-shaped profile. Fitted over an external corner the profile acts as an edge protector and hides the exposed edge. Set into an internal corner it masks the joint between two surfaces for a clean finish.
Ours are natural pine, sanded smooth and ready to paint, stain, varnish or oil to match the room. Because it is real timber, the finish blends into good joinery in a way plastic cannot.
Sizes and finishes
The range covers equal angles from 20x20mm up to 60x60mm, plus unequal profiles at 50x20mm and 70x30mm for wider edges. Every size comes in 1 metre and 2.4 metre lengths, so you can keep joins to a minimum on longer runs. The 50mm pine angle is the most popular size for wall and panel corners.
All profiles are supplied in natural pine ready to finish however you like.
Where to use wooden corner trim
- Wall corners and reveals, internal and external
- Wall panelling and cladding edges
- Shelving, cabinet and furniture edges
- Boxing in pipes and radiator runs
- Picture frames and general timber joinery
As natural timber, pine profiles are best suited to dry interior spaces, or fully sealed and painted before they go anywhere humid.
Wood, PVC or aluminium?
Wood is the right pick for dry rooms and decorative work where the finish matters. For kitchens, bathrooms and high-traffic areas, a moisture-proof PVC corner profile holds up better, and for heavy commercial wear an aluminium corner profile is tougher again. If you are still deciding, our guide on wood angle trim vs PVC walks through durability, moisture and cost.
How to fit and finish
Cut to length with a fine-tooth saw, mitre the ends at 45 degrees where lengths meet at a corner, then fix with panel pins, screws or a strong grab adhesive. Fill any pin holes and paint or stain to finish. For the full range in a single size and length, see the pine wood corner angle trim.
Wooden corner profiles FAQ
Are wooden corner profiles the same as corner protectors?
Yes. Fitted over an external corner the profile protects the edge, which is why they are also sold as wooden corner protectors or wood corner guards.
Can I paint or stain them?
Yes. They are natural pine, so they take paint, stain, varnish or oil once lightly sanded and primed.
What size do I need?
Match the profile to the edge you are covering. 20mm to 40mm suits most trim and panel work, 50mm and 60mm cover larger or more visible corners.
Can wooden corner trim be used outside?
Pine is best kept to interiors. It can be used externally only if it is fully sealed and painted, otherwise it will absorb moisture and move.
Browse the full range above, or step across to PVC corner profiles if the corner sees water. Fast UK-wide delivery from our Barnsley warehouse, same-day dispatch on orders before 12pm.
